No products
Prices are tax included
Categories
List of products by manufacturer DATEC Electronic AG
-
DATEC - Analog output 0-10V - 4-channels
The Datec Analog output 0-10V, 4-channels is a DIN Rail. mounted KNX device, for Heating or Cooling applications in offices, hotel rooms and much more. The device can drive analog 0-10V valves as determined by the room controller.
101,64 €Online only -
DATEC - DIN rail support
DATEC Electronic AG - DIN rail support for actuators and binary inputs modules.
4,11 €Online only -
DATEC - Flush mounted binary Input 8 fold
The KNX Module 8 digital inputs from Datec Electronic also includes 8 outputs for LED status. In addition, the inputs can be used for both push buttons or temperature sensors!
68,97 €Online only -
DATEC - Flush mounted switch actuator...
DATEC Electronic AG - Flush mounted switch actuator 4-channels 10A The switch actuator 4-channels is a flush mounted KNX device for lighting and shutter applications in homes, offices, hotel rooms, … The 4 dry contacts can be used for switching max. 4 channels or driving 2 shutters/ blinds. The device also features 8 general use digital inputs and 4...
90,75 €Online only -
DATEC - KNX / DALI actuator 1x 8 channels
DATEC Electronic AG - KNX / DALI actuator 1x 8 channels The KNX / DALI Gateway is a device for controlling and monitoring up to 8 DALI ballast. With its KNX input which is transformed into a DALI signal it is not necessary to have complex electrical installations, and due to its decentralized housing it can be installed near the lighting equipment...
111,32 €Online only -
DATEC - Thermal Actuator 0-10V
The Analog valve 0-10V is used for flow control in heating or coolingapplications in offices , hotel rooms,...
89,00 €Online only -
DATEC KNX Power supply 160mA
DATEC Electronic AG - KNX Power Supply 160mA The KNX power supply 160mA from DATEC Electronic AG is used to supply a KNX line. It has an additional 30VDC output. The total current is internally limited to about 0.35A. The power supply is protected against of short-circuit and a Surge protection for the KNX bus.
81,07 €Online only -
DATEC KNX Power supply 640mA
DATEC Electronic AG - KNX Power Supply 640mA The KNX power supply 640mA from DATEC Electronic AG is used to supply a KNX line. It has an additional 30VDC output. The total current is internally limited to about 1.2A. The power supply is protected against of short-circuit and a Surge protection for the KNX bus.
88,33 €Online only
